The MTT Dual Speed Pneumatic Torque wrench is proudly Made in the USA. This multi-sleeve, continuous rotating, pneumatic torque wrench will tighten or loosen threaded fasteners with a +/- system accuracy of 3% and a +/- repeatability of 2%.
The MTT Millennium Tru Torc ® will produce from 60 to 5,000 ft. lbs. of torque while the operator only feels 12 to 18 lbs. of torque on the pistol grip.
When a powered bolting solution is needed for high torque fasteners, MTT's Dual Speed Pneumatic Torque Wrench will provide high performance and accurate torque control. The two-speed gearbox design produces quick nut-run-down times.
Operators' hand force is negligible with an output of 2Nm, 50% lower than existing market tooling.
The Dual Speed Pneumatic Torque Wrench tool range has an air requirement of 24cfm, making each tool versatile and sets it apart from existing market offerings– which normally have air requirements up to 40 or 50cfm. Producing the lowest air requirement in the industry, MTT's pneumatic torque range can be expanded and applied to more areas including remote field applications.
All MTT Nutrunners are certified. All primary standards used are certified and are traceable to N.I.S.T. All calibration certifications meet the requirements of ISO/IEC 17025:2005. ANSI/NCSL/Z-5401-1994 PART 1 and when required, 10CFR50. App. B.
The MT-TWLC Series Wrench was designed for the most inaccessible bolting areas found in industry. Its low height and tight nose radius have all added to its great success.
|Tool Model||Torque (ft lbs)||Idling RPM||Weight (lbs)|