Low-clearance hydraulic torque wrench cassettes sorted by hex size on a labeled shop shelf
Hydraulic Torque Wrenches

Low Clearance Hydraulic Torque Wrenches

Low clearance and super slim line hydraulic torque wrenches engineered for the most inaccessible bolting areas. When standard wrenches won’t fit, our low clearance models get the job done.

MT-TWLC Series Low Clearance Hydraulic Torque Wrenches

In industrial bolting, clearance is everything. Heat exchanger channel heads, reactor covers, and congested piping runs often leave minimal space between bolt heads. Standard hydraulic torque wrenches simply won’t fit.

The MT-TWLC Series Low Clearance Hydraulic Torque Wrench is engineered for the most inaccessible bolting areas found in the industry. It features a low profile hex link with a long neck, short height, and small radius, with superior torsional strength and a fast operation cycle. It has a small nose radius with minimal height and width dimensions, and its high strength design allows it to weigh less. The MT-TWLC is available in multiple sizes and torque levels.

MTT sells, rents, and services the MT-TWLC and MT-TWSL series low clearance hydraulic torque wrenches, Hydraulic Technologies brand tools that MTT distributes.

Key Features

  • Low Weight, High Strength Design
  • Superior Torsional Strength
  • Fast Operation Cycle
  • Fine Tooth Pawl
  • Floating Piston Design
  • Auto-Connect Drive Piston
  • Compact Frame Size
  • Rigid Steel Body Construction
  • Internal Swivel Manifold Relief
  • Built-in Reaction Pad
  • Small Nose Radius
  • Tool Free Link Change
  • Corrosion Resistant Finish
  • Multi-Axis High Flow Swivel Manifold
  • Simple Design
  • Consistent Torque Output
MT-TWLC4 low clearance hydraulic torque wrench with a hexagonal opening, a silver swivel manifold and two hose couplers MTT-marked low-clearance hydraulic torque wrench with a hose, seated on a blue-coated flange nut

MT-TWLC Specifications

Drive BodyHex Range Min (in)Hex Range Max (in)Minimum Torque (lb-ft)Maximum Torque (lb-ft)Approx. Weight (lb)
MT-TWLC21-1/4"2-3/8"1891,5757.7
MT-TWLC41-1/2"3-1/8"4773,97515.4
MT-TWLC82-1/4"3-7/8"9547,95024.3
MT-TWLC152-9/16"4-5/8"1,78214,85041.9
MT-TWLC303-1/8"6-1/8"3,45628,80083.8

Note: Minimum torque can be lower depending on pump low-pressure capability.

MT-TWLC Dimensions

Dimension drawing of the MT-TWLC low clearance wrench, side and end views, with measurements A to J and the nose radius marked
SizeA (in)B (in)C (in)D (in)E (in)G (in)H (in)
MT-TWLC23.84.150.31.41.31.7
MT-TWLC44.75.16.30.41.71.72
MT-TWLC85.86.2711.62.12.6
MT-TWLC156.97.37.91.11.72.53
MT-TWLC308.89.410.512.43.23.7

Note: F in the drawing is an angle. The radius and dimensions I and J depend on the link size; contact our office for details.

MT-TWSL Series Super Slim Line Hydraulic Torque Wrenches

Two MT-TWSL4 super slim line hydraulic torque wrench links with hexagon openings, marked TWSL4-2 and TWSL4-5, the TWSL4-5 fitted with a black drive body, a swivel and a hose coupler

The MT-TWSL Super Slim Line Hydraulic Torque Wrench is engineered to fit inaccessible applications with minimal clearance. It showcases the smallest nose radius on the market with minimal height and width dimensions. The drive body is designed to interchange with the TWLC (Low Clearance) and the new TWSL (Slim Line) links, lowering your tool investment across each series to broaden your application reach.

Dynamic Engineering Modeling (FEA) optimized the tool design to extend life and durability. The Slim Line links use the same quick change drive body as the existing TWLC links.

Super Slim Line Features

  • Small Nose Radius, fits all standard API and ANSI flanges
  • Rigid Steel Body Construction with Corrosion Resistant Plating
  • Fully Enclosed Drive Mechanism for operation safety
  • Swivel Manifold has an internal relief valve to prevent retract side over pressurization
  • Multi-Swivel Technology for free positioning of tool and hoses
  • Narrow width and reduced radius design enables the tool to fit into tight areas where standard low clearance links cannot

MT-TWSL Specifications

Drive BodyHex Range Min (in)Hex Range Max (in)Minimum Torque (lb-ft)Maximum Torque (lb-ft)
MT-TWSL21-1/8"2-3/8"2221,850
MT-TWSL41-13/16"3-1/8"5052,639–4,210

Maximum torque depends on the link size; see the link tables below.

MT-TWSL2 Links

LinkNut A/F (in)Nut A/F (mm)Maximum Torque (lb-ft)Weight, Link Only (lb)
MT-TWSL2-0321-1/4"31.751,2404.0
MT-TWSL2-0361-7/16"36.571,4294.2
MT-TWSL2-0411-5/8"41.401,6004.3
MT-TWSL2-0461-13/16"45.971,8504.3
MT-TWSL2-0502"50.81,8504.3
MT-TWSL2-0552-3/16"55.621,8504.4
MT-TWSL2-0602-3/8"60.451,8504.4

MT-TWSL4 Links

LinkNut A/F (in)Nut A/F (mm)Maximum Torque (lb-ft)Weight, Link Only (lb)
MT-TWSL4-0461-13/16"46.02,6397.9
MT-TWSL4-0502"50.83,2708.2
MT-TWSL4-0552-3/16"55.63,5688.2
MT-TWSL4-0602-3/8"60.53,8668.4
MT-TWSL4-0652-9/16"65.04,2108.4
MT-TWSL4-0702-3/4"69.94,2108.4
MT-TWSL4-0752-15/16"74.74,2108.4
MT-TWSL4-0803-1/8"79.54,2108.4

Note: For other link sizes, contact our office for details.

MT-TWSL Dimensions

Dimension drawing of the MT-TWSL slim line wrench, front and side views, with measurements A to G and the hex range marked
SizeA (in)B (in)C (in)D (in)E (in)F (in)G (in)
MT-TWSL25.714.495.047.260.350.981.65
MT-TWSL46.615.396.618.830.421.22.04

Accessories

In-Line Extension Bar

  • In-Line Extension Bar for MT-TWLC wrench allows extended reach on the same plane
  • Pin engagement, no tools required
  • Available for full range of tool sizes

Off-Set Reaction Arm

  • Off-Set Reaction Arm for MT-TWLC wrench; allows off-set reaction within the wrench profile
  • Pin engagement, no tools required
  • Light alloy construction
  • Available for full range of tool sizes

Torque Wrench Handle for MT-TWHC & MT-TWLC

  • Robust steel construction with ribbed polymer grip
  • Multi-position on tool for balanced handling
  • Cap-screw locking with positive ‘docking’
  • Suitable for all wrench models (MT-TWHC, MT-TWLC) except MT-TWHC50, which has lifting points only; for larger sizes (MT-TWHC20/MT-TWHC35/MT-TWHC50/MT-TWLC30) we recommend the use of eye-bolt lifting

Where Low Clearance Wrenches Excel

Heat Exchanger Bolting

Channel head and tube sheet bolting on heat exchangers is a typical application for low clearance wrenches, where tight bolt patterns leave limited swing room.

Reactor & Vessel Covers

Large-diameter reactor covers and pressure vessel flanges often have stud arrangements that demand a slim wrench profile for adjacent-bolt access.

Congested Piping

In petrochemical and refinery environments, piping runs are packed tight. Low clearance wrenches allow bolting without removing adjacent piping or equipment.

Turbine & Compressor Casings

Power generation and rotating equipment applications frequently require low profile tooling to reach bolts recessed in tight casing joints.

Need a Low Clearance Wrench?

Call us for pricing, rental availability, or help selecting the right model for your application.