Machined metal cylinder with a threaded end against a red surface, with curled metal shavings below
Field Machining

Stud Removal & Mag-Based Drilling

Broken stud extraction and mag-based drilling for on-site stud removal, hole drilling, and tapping — without removing equipment from service.

On-Site Stud Removal & Mag-Based Drilling

Broken studs are an inevitable reality in industrial maintenance. Whether snapped during disassembly, corroded in place, or damaged by thermal cycling, broken studs must be removed without damaging the parent material — the flange, vessel, or equipment body they are threaded into.

Millennium Torque & Tensioning provides on-site stud removal services using core drilling, twist drilling, and mag-based drills. We remove fractured and galled studs, bolts, dowels, and pins in the field.

Our core drilling process is guaranteed to save you time and money. Instead of drilling the studs in several stages, we core the stud to within 1/32" of the minor diameter in only one step with one bit. Conventional drilling requires multiple stages, more man hours, and more consumables — our core drilling method can reduce drilling time from 3 to 8 hours per stud to just 10 to 30 minutes per stud.

Conventional methods of drilling require 95 percent of the stud to be drilled in several stages. Our core drilling method cores as little as 5 percent of the stud and leaves the remaining 95 percent of the stud as a slug. Core drilling requires fewer tools than conventional drilling, and the tools used are smaller, more manageable, and safer than those used in conventional drilling.

Our mag-based drilling services are also used for on-site hole drilling and tapping when fixed machine tools are not available. The magnetic base drill clamps securely to the workpiece, providing a stable platform for precision drilling in any orientation.

Equipment & Capabilities

  • Mag-based drilling machines for precision hole drilling
  • Core drilling and twist drilling
  • Studs from 11/16" to 5-3/8" diameter, up to 12" deep
  • Countersinking and tap & die
  • Thread repair and thread repair inserts
  • Available 24/7 for emergency stud removal

Applications

  • Fractured and galled stud, bolt, dowel, and pin removal
  • Drilling holes for tapping studded or bolted connections
  • Clearance hole drilling for fastening components — fine finish and close tolerances
  • On-site hole drilling for structural modifications
  • Thread repair and insert installation
  • Tap hole drilling for new connections
Ratchet turning a threaded tool in one of a ring of threaded holes, with threaded stubs standing in some of the others

Need Stud Removal or Drilling?

Call us 24/7 or request a quote. We’ll extract broken studs on-site.