Dual Speed Pneumatic Torque Wrench
Two speeds, maximum efficiency. A two-speed gearbox gives quick nut run-down with ±3% system accuracy — dual speed pneumatic torque wrenches save time on every bolt cycle.
The MTT Dual Speed Pneumatic Torque Wrench
The MTT Dual Speed Pneumatic Torque Wrench is proudly Made in the USA. This multi-sleeve, continuous rotating, pneumatic torque wrench will tighten or loosen threaded fasteners with a +/- system accuracy of 3% and a +/- repeatability of 2%. The MTT Millennium Tru Torc® will produce from 60 to 5,000 ft. lbs. of torque.
When a powered bolting solution is needed for high torque fasteners, MTT’s Dual Speed Pneumatic Torque Wrench will provide high performance and accurate torque control. The two-speed gearbox design produces quick nut-run-down times. Operators’ hand force is negligible with an output of 2Nm, 50% lower than existing market tooling.
The Dual Speed Pneumatic Torque Wrench tool range has an air requirement of 24 CFM — the lowest air requirement in the industry — setting it apart from existing market offerings, which normally have air requirements up to 40 or 50 CFM. That makes each tool versatile enough to be applied to more areas, including remote field applications.
All MTT Nutrunners are certified. All primary standards used are certified and are traceable to N.I.S.T. All calibration certifications meet the requirements of ISO/IEC 17025:2005, ANSI/NCSL Z-540-1-1994 Part 1 and, when required, 10CFR50 App. B.
Key Features
- Two-speed gearbox design produces quick nut-run-down times
- +/- system accuracy of 3% and +/- repeatability of 2%
- Produces 60 to 5,000 ft. lbs. of torque
- Operator hand force output of 2Nm — 50% lower than existing market tooling
- 24 CFM air requirement — the lowest in the industry
- Certified and traceable to N.I.S.T.
- Proudly Made in the USA
Specifications
| Tool Model | Torque (ft lbs) | Idling RPM | Weight (lbs) |
|---|---|---|---|
| MTT-7 | 60–670 | 60 | 11 |
| MTT-13 | 100–1,300 | 25 | 14 |
| MTT-30 | 250–2,500 | 10 | 18 |
| MTT-40 | 350–3,700 | 8 | 19 |
| MTT-50 | 500–5,000 | 6 | 29 |
Dimensions
| Tool Model | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | G (in) | L (Drive) |
|---|---|---|---|---|---|---|---|---|
| MTT-7 | 12.1 | 7.5 | 3.23 | 2.92 | 4.93 | 2.25 | 0.95 | 3/4" |
| MTT-13 | 12.57 | 7.5 | 3.23 | 3.66 | 5.52 | 2.4 | 1.06 | 1" |
| MTT-30 | 14.16 | 7.5 | 3.23 | 3.56 | 5.91 | 2.88 | 1.06 | 1" |
| MTT-40 | 15.84 | 7.5 | 3.23 | 3.9 | 6.38 | 3.39 | 1.58 | 1-1/2" |
| MTT-50 | 17.1 | 7.5 | 3.23 | 4.73 | 8.59 | 3.86 | 1.65 | 1-1/2" |
Applications Include
- Track Bolts
- Mechanism Bolts
- Pan Line Bolts
- Segments
- Gear Boxes
- Screens
- Cutterheads
Accessories
Millennium Torque & Tensioning, Inc. provides a variety of reaction arms for all types of applications. Weld rings are also available for on-site fabrication. Our experienced staff can assist you with your particular needs both in-house and on-site.
Custom Reaction Arms
- Custom Aluminum Reaction Arm
- Center to Center Adjustable Reaction Arm
- Standard Reaction Arm
- Straight Arm
- Custom Bent Arm
- Torque Tube Extension
- Weld Ring