Hot tapping machine set up on industrial pipe with chain support for pressurized branch connection
Intervention Services

Hot Tapping Services

Millennium Industrial Services creates new connections on live piping, vessels, and tanks without requiring the system to be shut down or drained. Our hot tapping teams support planned modifications and urgent operating needs across industrial plants and pipeline facilities.

What Is Hot Tapping?

Hot tapping, also called pressure tapping or wet-tapping, is a controlled method of cutting into an operating pressure-containing system. A branch fitting and valve are installed first; a tapping machine then advances a cutter through the open valve, retains the cut coupon, and withdraws before the valve is closed. The result is a usable branch connection with minimal interruption to the process.

Our Hot Tapping Capabilities

MIS performs live taps from 1/2 inch through 48 inches at pressures up to 1,480 psi without a system shutdown. Certified technicians execute each project using equipment selected for the connection size, operating pressure and temperature, product, wall thickness, and site access. Because not every system is a candidate, our planning process confirms material compatibility, fitting design, welding requirements, hazards, and operating limits before mobilization.

Hot tapping machine in a steel frame, mounted on a valve over a pipe in an excavation

When Is Hot Tapping Used?

  • Adding branch connections to live pipelines or process piping
  • Installing pressure, temperature, sampling, or flow-measurement points
  • Creating bypass connections for a repair or modification
  • Adding chemical-injection, drain, vent, or monitoring connections
  • Supporting emergency modifications when a shutdown is impractical

The Hot Tapping Process

The work begins with engineering and field verification of the host pipe and operating conditions. The branch fitting is installed and inspected, then a valve and pressure-rated tapping machine are mounted and tested. Technicians pressure-test the assembly, advance the pilot and cutter, complete the cut, retract the coupon, and close the valve. The machine is removed only after the connection is confirmed secure.

Job-specific procedures, exclusion zones, equipment inspections, pressure testing, and communication with operations are built into execution. When properly planned, hot tapping preserves production while providing the access point needed for a new connection, line stop, or future isolation.

Related Services

Hot taps are often paired with line stops to isolate a section of piping for replacement or repair. Insert valves can add a permanent isolation point, while leak repair and field machining address defects or connection preparation within a broader scope.

Need a Hot Tap?

Need a connection on a live system? Call 1-866-370-0954 or contact Millennium for hot tapping support, available 24/7/365.