Large steel pivot pins, sleeves and bolts resting on worn steel lugs
Partner Equipment

Nord-Lock Bolting Solutions

Nord-Lock wedge-locking washers, which use tension instead of friction to secure bolted joints exposed to severe vibration, plus Superbolt multi-jackbolt tensioners.

Nord-Lock Wedge-Locking Washers

Bolted joints that experience vibration, dynamic loads, or thermal cycling are at risk of loosening over time. Standard lock washers and thread-locking compounds offer limited protection. Nord-Lock wedge-locking washers utilize tension instead of friction in order to secure bolted joints exposed to severe vibration and dynamic loads.

Nord-Lock Group equipment is available through MTT.

Key Benefits

  • Quick and easy to install and remove with hand tools
  • Locking function not affected by lubrication
  • High corrosion resistance
  • Reliable locking, even for joints with short clamp length
  • Reusable (depending on usage environment)
  • Steel washers tested with at least 1,000 hours in the Neutral Salt Spray Test
Two Nord-Lock washers of different sizes, stamped NORD-LOCK, showing their radial serrations

Nord-Lock Washer Range

WasherApplicationsSize RangeBolt GradesTemperature Range
Nord-Lock Steel Washers (Delta Protekt® KL100 zinc flake coating)General steel applicationsM3–M130 (#5 to 5)Up to 12.9-50°C to 200°C
Nord-Lock Stainless Steel WashersGeneral steel applicationsM3–M80 (#5 to 3-1/8")Up to A4-80-160°C to 500°C
Nord-Lock 254 SMO® WashersCorrosive environments — chloride-rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processingM3–M39 (#5 to 1-1/2")Up to A4-80-160°C to 500°C
Nord-Lock Alloy 718 WashersAcidic environments — chemical industry, evaporators, offshore, downhole toolingM4–M20 (#8 to 1-1/2")—-160°C to 500°C
Nord-Lock Alloy 718 Washers (high temperature)High temperatures — gas turbines, turbo chargers, incineratorsM4–M20 (#5 to 1-1/2")—-160°C to 700°C

Superbolt Bolting Products

Superbolt Tensioners

Superbolt multi-jackbolt tensioners on a large flange, one being tightened with a torque wrench

Superbolt tensioners offer simple and cost-effective tightening of large size bolts. Your joints can be tightened with high accuracy without requiring specialized skills or heavy tooling. A wide range of tensioners is available in the standard series, as well as an unlimited capacity to create special designs to meet your unique needs.

  • Dimension range: 3/4" – 6"
  • Approx. bolt stress depending on size: 250 to 1200 N/mm² (35 to 175 ksi)
  • Temperature range: -40 to 350°C (-40 to 650°F)
  • Quick and easy installation and removal — only hand tools required
  • Safe method for installation; fits in restricted areas

Superbolt Flexnuts

Superbolt flexnut, a stainless steel hex nut on a flexible collar

Flexnuts have been specially developed for through-hole applications. Their reactive design distributes the bolt load along many threads, adds elasticity, and prevents stress concentrations in the first few threads — increasing the fatigue life of the bolt. Since Flexnuts are reactive nuts to be used opposite Superbolt tensioners, they are never torqued directly to achieve preload.

  • Dimension range: M20 – M160 (3/4" – 6")
  • Approx. bolt stress depending on size: 450 to 900 N/mm² (60 to 130 ksi)
  • Temperature range: -10 to 250°C (0 to 500°F)
  • Ensures an equal load distribution on the thread of the bolt/stud, under load
  • Adds elasticity in the joint

Superbolt EzFit

Cutaway of a Superbolt EzFit expansion bolt fitted in a bore

EzFit mechanical expansion bolts offer tremendous radial expansion and joint clamping power in one bolting system. They are specially designed for rotating couplings or alignment systems that require the bolts to transfer forces in shear. This innovative product replaces large fitted or interference fit bolts, no modifications required — the key to this solution is the split expansion sleeve that mates with the customer’s machined holes. EzFit mechanical expansion bolts can be designed using the latest FEA technology for any type of coupling with bolts of diameter 20 mm (3/4") or upwards.

  • Mechanical expansion bolt for threadless bore, blind holes, and through-holes
  • Quick and easy to install and remove — only hand tools needed
  • No need for special high-powered tools and bolt deep freezing
  • Reusable split sleeve that springs back to original size, use after use

Superbolt Load Sensing Tensioner (LST)

Superbolt load sensing tensioners with a sensor box and a handheld reader showing the bolt preload

Equipped with a strain-measuring device, the patented LST analyzes the variation of the tensioner’s circumference in proportion to the variation in bolt preload. The LST offers remote monitoring and a live reading of data — all with an accuracy that is better than +/-5%. Retrofitting is seamless: simply replace the original nut with the LST, with no alteration needed to the assembly.

  • Remote preload monitoring and a live reading of data
  • Robust and reliable, IP67 classed
  • Internal ring option (sensors mounted in the groove) — CY or MT version, standard sizes M36–M100, standard shaped MJT
  • External ring option (sensors mounted on the outer diameter) — enables the use of more readily available standard configuration multi-jackbolt tensioners (MJTs) for faster turnarounds

Superbolt Load Sensing Flexnut (LSF)

The LSF’s built-in sensors automatically measure and communicate preload values, allowing for seamless remote monitoring. This SMART product can be used in conjunction with any type of tightening method — tensioning, torquing, heating, etc.

  • Measures preload with an accuracy that is better than ±5%
  • Both local and remote monitoring options
  • Robust and reliable, IP67 classed

Expander System & Hydraulic Nuts

Expander System

Cutaway of an expander pin fitted through a lug, held by a bolt and washer

Lug wear is a common problem with all machinery. Repairs involve a costly, time-consuming process with significant downtime and must be repeated several times over a machine’s life. With the Expander System, the repair can be carried out directly in the worn mountings without welding and line boring — a permanent solution to lug wear.

Hydraulic Nuts

Boltight hydraulic nut with two lifting eyes
Boltight hydraulic nut
Boltight TSR+ hydraulic bolt tensioner with two lifting eyes and a blue band
Boltight TSR+ hydraulic bolt tensioner

Hydraulic nuts enable large diameter bolts to be tensioned with ease to high and accurate preloads. A hydraulic pump activates the internal jacking system, so the effort required to tighten a very large diameter bolt is reduced to the effort needed to operate the pump. As there is no nut rotation during tightening, the operation can be performed in a confined space, and any number of hydraulic nuts can be connected together for simultaneous operation — ensuring all bolts in the joint are evenly loaded to the same high and accurate preload.

  • Available as bottom collar, top collar, and shim type
  • Standard 1500 bar and 2500 bar designs; A20/A15 range
  • Substitutes original nut — combines tensioner and permanent nut; nut remains in place post tensioning
  • Supplied up to M400 in size (to date) — larger sizes quoted
  • High temperature solutions available; special designs available
  • No torque or torsion stress; 100% simultaneous tension
  • Less stud protrusion required than for tensioners

Common Applications

Vibration & Dynamic Loads

Bolted joints exposed to severe vibration and dynamic loads, secured with Nord-Lock wedge-locking washers that use tension instead of friction.

Corrosive & Chloride-Rich Environments

Offshore, pump, heat exchanger, nuclear, food, medical, and processing applications, with Nord-Lock 254 SMO® washers.

Acidic & High-Temperature Service

Acidic environments, including the chemical industry, evaporators, and downhole tooling, and high-temperature service up to 700°C in gas turbines, turbochargers, and incinerators, with Nord-Lock Alloy 718 washers.

Couplings & Worn Mountings

Rotating couplings and alignment systems where bolts transfer forces in shear (Superbolt EzFit), and worn machinery lugs repaired in place without welding or line boring (Expander System).

Need Nord-Lock Products?

Call us for pricing, stock availability, or help selecting the right product for your application.